Cast Iron Gate Valve - Oval Body
PN 10 DN 40 . . . DN. 80
 |
Connection Flanges dressed and drilled according to UNI-DIN NP 10 |
|
Test and working pressure and temperature according to UNI 1284 |
kembali ke atas |
|
 |
Cast Iron Gate Valve – Oval Body
PN 16 DN. 40 . . . DN. 800
|
Connection flanges dressed and drilled according to UNI-DIN NP 16 |
|
Test and working pressure and temperature according to UNI 1284 |
|
DN 700/800 supplied with manual gear reductor |
kembali ke atas |
|
 |
Ductile Iron Gate Valve – Soft Seated
PN 16-PN 25 DN. 40 . . . DN. 600
|
Connection flanges dressed and drilled according to UNI-DIN NP 16 |
|
Epoxy painting, Handwheel included |
|
Test and working pressure and temperature according to UNI 1284 |
|
Maximum working temperature 110°C |
kembali ke atas |
|
 |
Rubber Seated Lugged Type Butterfly Valve
PN 10/PN 16 DN. 40 . . . DN. 600
|
Regulating and on-off butterfly valve, suitable for water, gas, oil & fuel |
|
Perfect pneumatic lightness, swift move, min. space and reduced weight |
|
Can be block in any position. |
kembali ke atas |
|
 |
Cast Iron Flanged Butterfly Valve
PN 10 DN. 200 . . . DN. 1400
|
This valve is used as shut-off device for stopping and starting flow in pipeline |
|
Possible gasket replacement without removing the valve from the line |
|
Connection flanges dressed and drilled according to UNI DIN NP 10 |
kembali ke atas |
|
 |
Cast Iron Swing Check Valve
PN 10-PN 16 DN. 40 . . . DN. 600
|
Suitable for horizontal and vertical system |
|
Connection flanges dressed and drilled according to UNI DIN NP10–NP16 |
|
Test and working pressure and temperature according to UNI 1284 |
kembali ke atas |
|
 |
Automatic Air Inlet-Relief Valve with Two
Ball PN 10-PN 16 DN. 40 . . . DN. 300
|
This valve is used for trouble-free operation of a piping system |
|
Release air during the piping filling and let air during the piping emptying |
|
Connection flanges dressed and drilled according to UNI DIN NP10–NP16 |
kembali ke atas |
|
 |
Automatic Air Relief Valve with Small
Orifice PN 16 DN. 25 . . . DN. 100
|
This valve is used for trouble-free operation of a piping system |
|
Release accumulated air in section of pipeline during the normal working |
|
Connection flanges dressed and drilled according to UNI DIN NP16 |
kembali ke atas |
|
 |
